Blow Molded Plastics Market Report 2021 | Global Trends, Segmentation, Growth, Opportunities, COVID-19 Analysis, Industry Share, Size, Statistics, Till 2028 | Grand View Research, Inc.

“Grand View Research, Inc. – Market Research And Consulting.”
According to a new report published by Grand View Research, Amid the global Covid-19 pandemic, the demand for various pharmaceutical products, disinfectants, and sanitizers has increased. This, in turn, is driving the demand for blow molded plastics in medical applications. The segment is expected to grow at a higher rate than the consumables & electronics and building & construction segments.

The global blow molded plastics market size is anticipated to reach USD 98.7 billion by 2028, according to a new report by Grand View Research, Inc., growing at a CAGR of 3.3% over the forecast period. The global industry is expected to witness significant growth over the forecast period owing to increasing product demand from various application industries. In the past few years, there has been a significant growth in technologies and equipment for manufacturing these plastics, which has enabled manufacturers to cater to specific requirements of several application industries, such as automotive, building & construction, packaging, and others.

Polyethylene Terephthalate (PET) has several applications in the packaging industry including in manufacturing bottles intended for the packaging of food & beverage products. This is expected to drive its demand over the forecast period. During the Covid-19 pandemic, the demand for Polypropylene (PP) and PET is expected to grow on account of the increased usage of face masks, protective gowns, and packaging bottles for hand sanitizers.

Extrusion blow molded plastics was the largest and the fastest-growing technology segment in 2020. This technology is a revolutionary form of the blow molding process. One of the main advantages of this process is that it enables the manufacturers to increase output along with the efficiency of providing customized products. Moreover, lower mold cost as compared to other processes makes it a cost-effective technology.

Browse full report with Table of Content @ https://www.grandviewresearch.com/industry-analysis/blow-molded-plastics-market

Blow Molded Plastics Market Report Highlights

The global market was valued at USD 75.7 billion in 2020 and is estimated to grow at a CAGR of 3.3% from 2021 to 2028
Polyethylene (PE) was the largest product segment in 2020. PE compounds are dominantly used across various industries and have been an integral material for the packaging industry
Acrylonitrile Butadiene Styrene (ABS) is estimated to emerge as the fastest-growing product segment from 2021 to 2028
This growth can be credited to the increasing demand for ABS from the automobile industry for the manufacturing of enclosures for electrical and electronic assemblies, automotive trim components, and protective headgears
Asia Pacific accounted for over 33% of the overall revenue share in 2020. China led the market in the Asia Pacific region
Favorable federal regulations by agencies, such as the Environmental Protection Agency (EPA), California Air Resources Board (CARB), and Scottish Environmental Protection Agency (SEPA), regarding carbon emissions along with the EU initiatives to develop blow molding applications for manufacturing lightweight and fuel-efficient cars are likely to boost the growth of the global market

For Requesting a Sample Copy of This Report, Please Visit @ https://www.grandviewresearch.com/industry-analysis/blow-molded-plastics-market/request/rs1

Blow Molded Plastics Market Segmentation

Grand View Research has segmented the global blow molded plastics market on the basis of product, technology, application, and region:

Blow Molded Plastics Product Outlook (Volume, Kilotons; Revenue, USD Million, 2016 – 2028)

Polypropylene (PP)
Acrylonitrile Butadiene Styrene (ABS)
Polyethylene (PE)
Polystyrene (PS)
Polyvinyl Chloride (PVC)
Polyethylene Terephthalate (PET)
Others

Blow Molded Plastics Technology Outlook (Volume, Kilotons; Revenue, USD Million, 2016 – 2028)

Extrusion
Injection
Stretch
Compound

Blow Molded Plastics Application Outlook (Volume, Kilotons; Revenue, USD Million, 2016 – 2028)

Packaging
Consumables & Electronics
Automotive & Transport
HVAC Ducts
Air Intake Ducts
Others
Building & Construction
Medical
Others

Blow Molded Plastics Regional Outlook (Volume, Kilotons; Revenue, USD Million, 2016 – 2028)

North America
U.S.
Canada
Mexico
Europe
Germany
U.K.
France
Italy
Asia Pacific
China
India
Japan
Central & South America
Brazil
Middle East & Africa
Saudi Arabia

List of Key Players of Blow Molded Plastics Market

Magna International, Inc.
International Automotive Components (IAC) Group
Inpress Plastics Ltd.
Comar, LLC
Rutland Plastics Ltd.
Gemini Group, Inc.
The Plastic Forming Company, Inc.
Agri-Industrial Plastics
Garrtech, Inc.
North American Plastics, Ltd.
Custom-Pak
APEX Plastics
INEOS Group
Berry Global, Inc.
Dow Inc.
LyondellBasell Industries Holdings B.V.

Inquire more or share questions if any before the purchase on this report @ https://www.grandviewresearch.com/inquiry/4640/ibb

 

About Grand View Research

 

Grand View Research is a market research and consulting company that offers market research reports, syndicated and customized reports. The company is headquartered in San Francisco, California. It offers client engagement for business consulting and market intelligence from various domains. The clientele is based across various countries with queries coming from more than 50 industries worldwide.

Grand View Research helps its clients to make informed decisions by helping them understand current trends and scenarios. Every year Grand View Research accomplishes more than 300 multi-country market studies to optimize consulting for clients.

Media Contact
Company Name: Grand View Research, Inc.
Contact Person: Sherry James, Corporate Sales Specialist – U.S.A.
Email: Send Email
Phone: 1888202951
Address:Grand View Research, Inc. 201 Spear Street 1100 San Francisco, CA 94105, United States
City: San Francisco
State: California
Country: United States
Website: https://www.grandviewresearch.com/industry-analysis/blow-molded-plastics-market